View Single Post
Old 09-11-2013, 10:36 AM
[email protected] is offline
TT Regular
Join Date: Sep 2011
Boat: 2006 X1
Location: Midwest
Posts: 59
How about putting the bottle jack under the pin so all the weight/pressure is on the pin then from the top, hit the top plate of that area a few times. Use a piece of wood on top so you don't damage the paint. I would do that than use a bigger hammer from underneath. With the boat jacked way up to give you room to swing and a big enough hammer it will have to come out. Watch your thumb!

Reply With Quote