View Single Post
Old 09-02-2013, 04:50 PM
andersonmc andersonmc is offline
TT Enthusiast
Join Date: May 2013
Boat: 2001 X star
Location: Northwest
Posts: 255
Originally Posted by gweaver View Post
As part of the powder coat process, the metal has to be baked in an over for the powder to set/cure. My guess is that the plastic tint material won't stand up to the heat. Any rubber seals/gaskets or glue holding the glass in isn't going to survive the heat either. If you're going to powder coat, you're going to have to pull the glass. Just have the tint done while the frame is being coated.
I was planning on having my painter do the frame if I chose to leave windshield in frame. I would only do powder if I took it apart.
Reply With Quote