View Single Post
  #3  
Old 08-31-2013, 10:58 PM
carracer's Avatar
carracer carracer is offline
TT Regular
 
Join Date: Jan 2010
Boat: MasterCraft 2008 X30
Location: Sheridan Ark. Lake Quachita
Posts: 143
Quote:
Originally Posted by johny123 View Post
I'm getting no crank when I turn the key. The gauges fire up when the key is turned, it sounds like the fuel pump is making noise, but no click from the starter/solenoid and nothing but a beep when I turn the key.

I tested the battery, 12.7v, cleaned the posts (they were already clean), tested the solenoid 12.7v, and checked for error codes - I get code 12 which is "normal condition (diagnostics system is operational)" - (as an aside, *** is the point of this code?).

Here are my questions:

1)Could the battery could still be bad even though it says 12.7v?
2)Does 12.7v at the solenoid mean I can rule it out?
3)Could the ignition switch be the problem even though the key positions do respond appropriately?

Thanks for the help guys
Hook up a charger on jump and rule in or out the battery,could be Solenoid not closing when the key switch /wire is hot. Cheap to replace I carry an extra solenoid in my tool box....
Reply With Quote