View Single Post
  #6  
Old 08-28-2013, 05:50 PM
73blue 73blue is offline
TT Enthusiast
 
Join Date: May 2010
Boat: 2004 X-10
Location: Douglas Lake
Posts: 308
I did. You have to remove the steering wheel( 3 bolts through dash and 4 bolts holding it to steering cable. You will need to fold the black accordion style rubber piece around the steering column back to access the 3 bolt heads). There is a wingnut underneath the dash at the very top that you will need to remove. The hang-up on mine came from a small black screw screwed into the fiberglass just below the steering column hole. Because it was black and screwed deeply into the black plastic it took a while to find. Remove that and the dash should come loose. You're only gonna be able to remove it as far as the wiring allows, so you may need to clip some zipties under the dash as well.
Reply With Quote