View Single Post
  #16  
Old 08-20-2013, 11:37 PM
Kell's Avatar
Kell Kell is offline
TT Enthusiast
 
Join Date: Jul 2004
Boat: 2009 X2, MCX
Location: Northwest
Posts: 446
Brakes engage when pushing boat in and out of garage

When I put our x2 in the garage I have to back up our driveway which has a slight slope. After I unhook the trailer coupler from the truck, I grab the coupler and pull it all the way out. That releases the pressure in the brake lines. Chalking the wheels then pulling forward with the toe vehicle will also work as suggested above.

The tab o the bottom I have used to flush the brake fluid or air out of the lines at each wheel disc brake bleed valve. Search for the UFP A60 coupler/actuator manual, this has a nice write up on the components and what they do.


Sent from my iPad 2 3G using Tapatalk
__________________
09 X2, MCX 350, VDig, PP, Heater, Shower, Bow Filler Cushin, Bimini, Wake Plate, 2 Tower Speakers w/Forward integrated docking lights, Tandom Low Profile Trailer
Reply With Quote