View Single Post
Old 08-07-2013, 02:54 AM
mallees's Avatar
mallees mallees is offline
TT Enthusiast
Join Date: Aug 2004
Boat: MasterCraft X2 2004 350 MCX
Location: Melbourne Australia
Posts: 229
Originally Posted by CantRepeat View Post
Not sure of the size, but the only one that looks like bearing used in the ballast puppy pump is this one.

At 5 bucks it's worth a try.
I don't think that is the right bearing, It looks like a 6001

I rebuilt a Jabsco ballast pump a few years ago, and when i bought the bearings, i had to get a few extras to make up a minimum order value.
I still have 1 sitting in my drawer NSK part# is 627z. Now it was several years ago, but I'm pretty sure this is the correct bearing. Only cost me about $3 each if i remember correctly. I assume you have stores in the States that specialize in bearings and seals. Bearing dimensions are:
22mm od
7mm id
7mm thickness.
Reply With Quote