Ran engine this morning. Checked to ensure that I had good vacuum on the PCV hose and that the PCV was opening. It was. No oil coming from the dipstick tube. Does not do it in the yard with engine 1500 rpms plus. Forgot to take a picture, but my setup is like this:
Also took a video of the engine running:
Excessive smoke, running rich or possibly water related? Remember it did run hot earlier. Could a blown head gasket do this and be my crankcase problem? No skips or rough idle or running. Compression seemed good. Look specifically about 20-25 secs and you can see excessive oil in the exhaust water on the concrete.