View Single Post
  #122  
Old 06-19-2013, 06:43 AM
hig's Avatar
hig hig is offline
TT Enthusiast
 
Join Date: Apr 2013
Boat: 1998 Mastercraft Maristar with a Corvette LT1
Location: Northeast
Posts: 150
Quote:
Originally Posted by FrankSchwab View Post
Normally with a relay, you'd need at least three connectors on the bottom - one for +12 to activate the relay (grounded through the case), and a guzinta and guzouta terminal. With only two terminals on this one, I'm at a loss - perhaps a circuit breaker (although it appears to be labeled with "12 v", not a current rating), perhaps something else. Really hard to tell.

/frank
I figured it out!! After reading your post I thought about it differently, I was thinking it was like a circuit breaker (but not marked with amps) or a noise supperessor and it was feeding the stereo power but it's getting power FROM the stereo.

I was planning on buying one of these and I knew the "box" looked simular but I did not put it together:

http://www.skidim.com/prodinfo.asp?number=SIEMP41400

It's an alarm buzzer!!. It's getting power from the stereo, going thru the buzzer to a normally open grounding sending unit!!! I applied power and it make a vibrating buzz sound.

When I reassemble the motor I will have to look for 1 or 2 not factory sending units.

Mystery solved!!!
Reply With Quote