Originally Posted by email@example.com
maybe you have the two heavy red cables reversed,
I'm unsure about a white wire
A terminal should be from battery heavy red/ 50amp breaker small red
B terminal should go to starter heavy red
S terminal should be ignition switch start/ neutral safety yellow with red trace
I terminal not used (or used as a bypass of the ballast resistor for full 12v for hot start cranking of the coil)
Exactly as I have it. But thanks for the response. Something has happened to the wiring since I winterized it last year.
Devil made me do it the first time.
Second time, I did it on my own.