View Single Post
Old 05-25-2013, 03:46 PM
TonyB's Avatar
TonyB TonyB is offline
TT Enthusiast
Join Date: Mar 2005
Boat: 1991 Prostar 190 Powerslot
Location: Somerville AL
Posts: 404
Wiring issue? 91 Prostar IGN reset has to be pushed

I have a 1991 Prostar 190. I am wondering if I've rewired my starter relay incorrectly. I definitely have it wired correctly from the battery wire and to the starter. It's the small red one that I'm concerned about.

The issue I have is that I crank the engine and it runs for about 5-10 seconds and shuts down. All gauges shut down and I have to push the IGN reset button on the dash before it will crank again. The only thing different from before is the starter relay. I sure thought I put it back exactly as before. But ...

I currently have the battery cable and small red wire (to circuit breaker) on one large post and starter cable on other large post. Small white wire on small post to neutral safety switch.
Devil made me do it the first time.
Second time, I did it on my own.

Last edited by TonyB; 05-28-2013 at 10:18 AM.
Reply With Quote