View Single Post
  #7  
Old 04-23-2013, 10:04 AM
j.mccreight@hotmail.com's Avatar
j.mccreight@hotmail.com j.mccreight@hotmail.com is offline
MC Maniac
 
Join Date: May 2010
Boat: 1989 MasterCraft TriStar 190 SE
Location: Houston, TX
Posts: 3,306
Quote:
Originally Posted by 87 TriStar 190 View Post
I have the carpeted panel, but when that's off, there's a fiberglass molded enclosure around the instrument pod. Can't get at anything from under there except the stereo. Might be able to remove the smaller panel that the ignition is mounted to, but not sure I could get my hand in there either. It's pretty tight because of all the wires. I do like the idea of blowing it out from the gauge position. Is there anything in the damping device I could damage with high pressure air?
You will need to remove the steering wheel that gives you access to remove the dash panel, only way to get enough room to remove the gauges.
__________________
James

1989 MasterCraft TriStar 190 SE
Reply With Quote