View Single Post
Old 04-13-2013, 02:42 PM
jafo9's Avatar
jafo9 jafo9 is offline
MC Devotee
Join Date: Jan 2011
Boat: 2002 X30 LTR
Location: Southeast
Posts: 1,142
I'm not at home so I can't snap a pic. I put mine under the accessory switches above the drivers right knee. I put it as far to the right as I could. I used a piece if scrap 2x4 and used it as a spacer. I just screwed through the bottom of the housing for the wires for the accessory switches. I measured carefully so I wouldn't destroy any wires. The 2x4 is the perfect spacer as my ws420 is pretty much flush with the bottom of the dash. I had initially bought a led lit piece of plexiglas as a housing, but it looked like it would take too much space from the driver, so I just went bare. If you want the led housing, I'll sell it at a loss.
Reply With Quote