View Single Post
Old 04-09-2013, 08:16 PM
jigster's Avatar
jigster jigster is offline
TT Regular
Join Date: Nov 2011
Boat: mastercraft x-10
Location: southeast
Posts: 71
As mentioned above, run the wires through the center oblong pipe where the marker light wires are. Luckily the holes in my tower were larger and i was able to get two runs of 14 gauge through no problem. I used the tc3 swivel clamps to mount mine but my outer cans are feed externally thru wires coming from the front pipe where the factory cans where. Use weather pak connectors at the tower joint so you can remove the tower if ever necessary.

Reply With Quote