View Single Post
Old 04-07-2013, 09:41 PM
homer12's Avatar
homer12 homer12 is offline
MC Fanatic
Join Date: Apr 2012
Boat: MC Tristar 190 OB, 1989
Location: midwest
Posts: 670
I agree with you guys on not using a brass or similar softer metal drift for shaft extraction. I will do differently in the future. For those without an arbor press, here's the method I used to put the shaft/bearings back in the housing. I used long bolts through the flange on the shaft and then used part of a harmonic balancer puller. I went slowly turning each bolt about a 1/4 turn each and pushed it back together nicely. We'll find out how successful this was when I get her out of storage and fired up.
Attached Images
Reply With Quote