View Single Post
  #17  
Old 03-22-2013, 08:01 AM
Mark rsa2au's Avatar
Mark rsa2au Mark rsa2au is offline
TT Enthusiast
 
Join Date: Mar 2013
Boat: Mastercraft X5 2001. 310hp preditor
Location: Australia
Posts: 182
Tested sensors with pin, then smeared dielectric grease over to help insulate.

Motor does idle but very lumpy, between 500rpm anf 800rpm. looking into the throttle body at idle it seems just enough air is getting through but the edges of the butterfly seem to get a fine line of white with ice and lumpy idle gets lower. One rev up and it clears the white ice ok.

WIll remove fuel filter and check, but will need a fuel pressure guage for safety.... will visit a bottle shop - for beer for mechanic!

High rev WOT still an issue with back firing / misfiring over 4100rpm. Changing to new plugs as previous plugs fouled from over fueling with faulty injectors - hope this works.
Reply With Quote