View Single Post
Old 03-06-2013, 01:39 AM
Kyle's Avatar
Kyle Kyle is offline
MC Maniac
Join Date: Jan 2007
Boat: 93 Prostar 190
Location: Fort Worth, TEXAS
Posts: 3,387
There is no need to buy a puller for the coupler and shaft.

Take the nut off of the shaft.

Put a socket between the two couplers.

Put the coupler bolts back on both coupler sides.

Tighten the two couplers together and the shaft will press out of the shaft coupler.

Now you may have to use a shallow socket and move to a deep socket to finally get the shaft free but I know it will work. Maybe heat the coupler if needed and wear se good gloves.

I have always removed the couplers this way. It works and saves money on a tool that will break or never be used again.
Rollin' Gangsta Style

Originally Posted by Thrall View Post
"Heavy" beer is for wine drinkers that are too embarrassed to drink wine in front of their buddies. "Light" beer is a drinkin' man's beer!
Originally Posted by thatsmrmastercraft View Post
If you want bling like the big dawgs, ya gotta lift your leg a little higher.....
Reply With Quote