Quote:
Originally Posted by Rockman
I put all the parts together (dry fit) yesterday at the house here and the only part that I need to get which I did buy one fitting but it is not correct is the one that would screw into the block to get the hot water...the threads on the one I bought were too wide...
I am gonna hit Menards on the way home and see what they have. What kind of fitting did you use for the hot?
I found your parts list and printed it...will search Skidim today also...
|
Post #74 shows the "tee" I have that goes to the heater and the shower. I don't know if this is the same method as a real shower (mine came to me jimmy rigged). I also don't have a pump and not much pressure. So if it works for you, I may go the route of that pump, I'm watching.
http://www.mastercraft.com/teamtalk/...t=51183&page=8