|
Another tip.
After getting the tranny mounts unbolted from stringer, wiring harness removed, shaft coupler separated etc
Get a strap or rope. Put it under the tranny tail shaft and pick up. The tranny and engine will move or rotate toward the pylon of your boat. Meaning the angle if the engine will become level. Grab a kid or wife or neighbor and have them tie a rope from the pylon to the exhaust risers. It won't be too heavy. Secure the angle to where the tranny is like 1" away from the stringer.
Remove bell housing bolts and the ground. There are (2) 1/2" or 7/16" bolts under the bell housing near the starter that you will have to remove as well. Slide tranny straight back. She is now out.
__________________
Rollin' Gangsta Style
Quote:
Originally Posted by Thrall
"Heavy" beer is for wine drinkers that are too embarrassed to drink wine in front of their buddies. "Light" beer is a drinkin' man's beer!  |
Quote:
Originally Posted by thatsmrmastercraft
If you want bling like the big dawgs, ya gotta lift your leg a little higher.....
|
|