View Single Post
  #3  
Old 01-29-2013, 06:38 PM
Cloaked Cloaked is offline
MC Maniac
 
Join Date: Dec 2004
Boat: MasterCraft
Location: Kingston,TN USA
Posts: 4,594
Quote:
Originally Posted by 03geetee View Post
I had to do this for the front screws on my driver seat in my 83 during the restoration. Now keep in mind I pulled my carpet out because I was replacing it, so your options for saving the carpet might not work.

I used Marine Tex and just pumped it into the hole until it was enough to stop it from falling through. Once hardened it was like concrete, new screws still holding strong. Now for your application unless you cut the carpet a little, this stuff is messy, you maybe able to get by for a bit with an alligator bolt or expanding anchor system.

Here is what I used in my floor, worked like a charm.



JTR
My vote........
__________________
93 190
.
Don't be a boot licker
.

Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8



Quote:
Originally Posted by Thrall View Post
..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

RE: Thrall, Welcome to the club....
NEW SKINS in TN... Leading Edge Marine Interior

feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

.
Reply With Quote