View Single Post
  #5  
Old 01-28-2013, 07:13 PM
tph's Avatar
tph tph is offline
MC Devotee
 
Join Date: Jul 2004
Boat: '83 Metalflake Blue on Grey S&S Powerslot, 351W
Posts: 1,130
*

I took a different approach:

- Mask off the holes to protect the carpet.

- Use a nail and vacuum to clear out a 1/4" to 3/8" inch area under the floor through the hole

- Fill that area with glass strand and polyester resin.

- Coat the screws with a thin coating of a release agent (WD-40, melted wax or ?)

- Insert the screws half way into the holes.

- Remove the screws after the resin has set.

You now have a threaded plug under the floor that is very strong.
Reply With Quote