Quote:
Originally Posted by jafo9
just curious, why not move the REV10s to the back bar?
|
The rev10s with the swivel mount have a pretty unique connector. The speaker wire connects through the clamp. I already had wires run to the forward bar from my pro80s, and there really is no good way to get the wires in the back bar of the tower.
Now, they offer the old style retrofit kits where the connector for the speaker wire is in the back of the speaker on the top. If I had to do it over again, I would probably just go with the older style connectors, but that was not an option when I installed mine.