Originally Posted by tr6coug
Thanks! I used the key switch initially as the cut-off switch and had it mounted under the dash zip-tied to the aluminum dash supports. This worked fine, but I found the toggle switch to be more convenient. Unfortunately, I didn't take any pictures of the key switch mounting.
You would wire the key switch so that the negative connection (e.g. from the cig lighter negative) would connect to the IGN or ACC position of the switch and the line to the control module would connect to the BATT terminal. Like this.
Thanks, so if I choose to use the key I have to find a place to mount it? There is no place on or in your control box to do this?
How big is the control box?
Sent from my wife's old iPad using Tapatalk....