View Single Post
  #52  
Old 01-09-2013, 11:25 PM
tr6coug's Avatar
tr6coug tr6coug is offline
MC Fanatic
 
Join Date: Aug 2007
Boat: Mastercraft 2007 X2 MCX
Location: OR
Posts: 612
Quote:
Originally Posted by Double D View Post
tr6coug, this really has my interest. brooks said that your old key switch can be used as the dead man switch so it's still disabled with a key. How does this get mounted in the box or around the box? Any pictures or diagrams on that?

Thanks, awesome work!


Sent from my wife's old iPad using Tapatalk....
Thanks! I used the key switch initially as the cut-off switch and had it mounted under the dash zip-tied to the aluminum dash supports. This worked fine, but I found the toggle switch to be more convenient. Unfortunately, I didn't take any pictures of the key switch mounting.

You would wire the key switch so that the negative connection (e.g. from the cig lighter negative) would connect to the IGN or ACC position of the switch and the line to the control module would connect to the BATT terminal. Like this.
Attached Images
 
__________________
'07 Navy Blue X2 MCX
http://www.wakeblaster.com/
Reply With Quote