View Single Post
  #22  
Old 01-03-2013, 08:28 AM
erervin erervin is offline
TT Regular
 
Join Date: Jul 2012
Boat: 2005 Mastercraft 197 TT
Location: Midwest
Posts: 71
An update on the brake overhaul on my trailer. I just put in an order for the items listed below from CalTrailer. If I'm going to replace the actuator and the calipers, I might as well go ahead and replace the lines to ensure there's no corrosion material left to foul up the brakes in the future. I'm going to turn the rotors. As soon as these parts come in I'm going to have my local weld shop fab the new housing to the existing hinge-piece.

Something else I decided to do while I'm working on the trailer is to replace the trailer pads located on the fenders. One had fallen off and the others were cracking badly. I decided to replace them with what Sk8solomon had done, all-brite aluminum diamond plate. I took the old pads in and they're cutting them using a flowjet. Material and labor is going to run me about $150. I intend to pop-rivit them to the fenders rather than glue them on.

I'll be posting pictures during the installation.

UFP A60 ACTUATOR / INNER MEMBER DISC ON ONE AXLE(34043)
UFP ACTUATOR HOUSING / OUTER MEMBER RAW LONG (34066)
BRAKE LINE KIT / ONE AXLE BRAKES
KODIAK 225 CALIPERS / PADS
__________________
2005 ProStar 197 Tournament Team
#8 of 100

Last edited by erervin; 01-03-2013 at 08:45 AM.
Reply With Quote