Quote:
Originally Posted by morganb
Yea that crossed my mind, there has been no vibration last summer, this summer i had noticed a small vibration jsut off the plain and it snapped on the 1st board, would alignment be likley to change between seasons?
|
FWIW, one thing you might also want to do is to measure alignment at the coupler before you pull the shaft. My marine mechanic simply loosened the bolts there and used a thickness gage to check. The gap should probably be within 3 thousands among the 4 readings (90-degrees apart). BUT, check your manual to ensure your spec.
Sorry missed table rocker's sound advice before I posted.