Well,
Here is what I have got. Didnt take pictures of the whole process but I do have pics of as it sits now - after todays progress.
Tested new sending unit with old gauge, old sender removed, light metal work to flaten out mount with a hammer and dowel {warped/bent a bit}, cleaned holes, re-tapped the holes, vacumed, and washed out the tank, reinstalled the new sending unit with new hardware....etc
May put it back in tomorrow after thread sealant is dry. (and depends on how much rubber I have to line the mounts.)
Cj
Quote:
Originally Posted by Scottman
Doing the exact same projects (among others) on my '78 in the spring. Any pics or thread?
Anyways, put boat/trailer up on blocks yesterday. Won't come off of them until the spring when I'm ready to start my projects  |
R