View Single Post
  #11  
Old 12-02-2012, 09:12 PM
j.mccreight@hotmail.com's Avatar
j.mccreight@hotmail.com j.mccreight@hotmail.com is offline
MC Maniac
 
Join Date: May 2010
Boat: 1989 MasterCraft TriStar 190 SE
Location: Houston, TX
Posts: 2,892
Quote:
Originally Posted by thatsmrmastercraft View Post
Also agree that if one change is to be made it should be a new prop. I would also look at the ignition system and upgrade to electronic (if it isn't already) and confirm that you are getting all the advance you are supposed to. I would also go through the carb as well.
I wouldn't worry to much with total timing advance. I would just ensure that its working as designed. On my original point distributor with EI it was 29 @ 3000 rpm and I "thought" it needed more timing so I bought the high dollar adjustable unilite marine distributor ($350) and set it at 36 and did some tuning and I actually picked up 100 rpm by bringing the timing back to 29. Oh well at least I have a good spare...
__________________
James

1989 MasterCraft TriStar 190 SE
Reply With Quote