Thread: Uh Oops
View Single Post
Old 11-27-2012, 08:05 AM
jfw432 jfw432 is offline
TT Enthusiast
Join Date: Apr 2012
Boat: other
Location: Lizella
Posts: 165
If you haven't fixed this yet, I have another option for you. You could drill a 1/4" or 5/16" hole in both the knob and the shaft, tap both for a bolt, cut the head off a 1.5"-2" bolt, then thread half the bolt into the knob, and finally screw the knob and other half of the bolt onto the shaft. Use loctite on both ends and it'll work for many years to come.
Reply With Quote