View Single Post
  #4  
Old 11-20-2012, 08:02 AM
MLA MLA is offline
TT Enthusiast
 
Join Date: May 2012
Boat: pontoon
Location: Lake Wylie Area
Posts: 396
RLayton,

Here are a few things to consider. First, as noted by dvsone79, are you looking to manually fill some sacs or are you ready to plumb in a system for an automated setup. Next is choosing the sacs. Are you looking for a surf setup or wake-board setup or one that will work for both? If you already know how the boat likes to be set up with ballast, then all you need to do is figure out what model sacs are going to fit in the boat lockers and yield the necessary weight. Fly High sacs are the best IMO, and offer quite a few standard and semi-custom premade options. On the off chance that one of those sacs just doesn't fit the available space, then Fly High will make a custom sac to your specs.

If you are not sure on what the best weight setup is for your boat, I would suggest enlisting the help of other 02 Maristar 210 owners. Pic their brains on how they set their boats up. From there, I would pickup some sacs and a W709 manual pump kit and run with that for a time so you can determine for yourself if its giving you the wake you seek. Once you are comfortable with the weight setup, then move forward with the plumbing.

There are 2 basic ballast designs, aerator live-well pumps and reversible impeller pumps. I have had great success with both pump types and typically let the boat dictate which pump system we go with. For the boats with shallower bilges and lower free-board, we typically go with the impeller pumps. They can be mounted anywhere between the pickup thru-hull and sac and are self priming. The aerator pumps are not self priming, so they need to be mounted right on the pickup and below the water line. This can be a challenge on the shallow boats.
Reply With Quote