View Single Post
  #8  
Old 10-30-2012, 06:40 PM
Lennyp04's Avatar
Lennyp04 Lennyp04 is offline
MC Devotee
 
Join Date: Jul 2007
Boat: MasterCraft, X-1, 2007, RTP-1
Location: Allentown, PA
Posts: 1,521
Send a message via AIM to Lennyp04
Quote:
Originally Posted by gts-20 View Post
Then do what I posted. By a new painted steel wheel, 15" x 6" or 15" x 7", 6-5.5 bolt pattern, for $40-$60 and put a used tire on it. I spent a total of $60 and that was with a spare tire cover and mounted to the trailer. If it is just for a spare, the wheel width doesn't matter as long as it's close. I did test fit the new wheel to make sure it fit over the hub, before I had the tire mounted, but it fit fine, and with plenty of clearence.
That is what I'm gonna do. I did some ebaying and found good prices on those steel wheels. They're actually hard to find! 15x6 with a 6x5.5 pattern must be a rare size. Out of curiosity, does it say on the wheel what the center bore is? I don't have the trailer in front of me but my dad is going to go up to the cabin and measure it tomorrow.
__________________
-Lenny


2007 MasterCraft X-1, RTP-1, Ballast, MC Cruise, swivel board racks, Glacier White and Midnight Black
Reply With Quote