View Single Post
Old 06-17-2012, 10:41 PM
tph's Avatar
tph tph is offline
MC Devotee
Join Date: Jul 2004
Boat: '83 Metalflake Blue on Grey S&S Powerslot, 351W
Posts: 1,476

You shouldn't have to yank too hard. All 5 sections need to be separated by removing the small screws in the panels between them. Also, check to make sure that you removed all the nuts and washers under the deck, and the screws at the very back of the side windows that are screwed directly into the deck from the top. Good luck!
Reply With Quote