View Single Post
  #27  
Old 05-24-2012, 10:24 PM
jakethebt's Avatar
jakethebt jakethebt is offline
MC Fanatic
 
Join Date: Jul 2005
Boat: '96 Prostar 205 LT-1
Location: Dayton, OH
Posts: 585
I dont think there is an adjustment on the calipers either. I think that only applied to the old drum brakes. I dont know why the calipers would cause grabbing. If you have a bad seal it leaks. If the piston is rusted in the bore, it will not move. If it were a case of the calipers not releasing, that could be resolved by new calipers or a rebuild. I really cant think of a reason why you would replace the calipers. I would be looking at the apply system. The master cylinder and the shock.
Reply With Quote