View Single Post
Old 04-29-2012, 07:16 PM
Chrisoswald Chrisoswald is offline
TT Enthusiast
Join Date: Mar 2012
Boat: 88 Prostar 190 & 2006 Chaparral Sunesta 232
Location: Atlanta GA
Posts: 124
the shaft coupler is pretty close to the trans coupler as far as could use a tweak as its not 100% lined up. when i disconnected the shaft coupler i expected the shaft to be able to be moved away from the trans coupler with a little effort..i had to grab the prop with both hands and twist it back and forth while pulling to get them to come that they are separated it still requires both hands to turn the prop. i ran the boat friday and no vibration and it behaved as expected. the boat is a fresh water boat and the strut is clean as can stumped as i believe that the shaft should spin freely especially when disconnected from the trans...hell, even when connected it shouldnt take this much effort..thanks for the feedback and any ideas are appreciated!!!
Reply With Quote