View Single Post
  #4  
Old 04-28-2012, 08:51 PM
Jerseydave's Avatar
Jerseydave Jerseydave is offline
TT Hero
 
Join Date: Jul 2004
Boat: 2005 X-STAR & 1993 Prostar 190 Limited
Location: Jersey
Posts: 5,412
There should be some drag when turning the prop so if you're use to an I/O or outboard it will spin way harder than those. There should be no up and down play in the bearing and the bearing material should look uniform all around the shaft.

If the boat has been on the trailer all winter and you're trying to turn the shaft it will feel extra tight until you run the boat in the water.
__________________
I was njskier on here.
Reply With Quote