View Single Post
  #64  
Old 11-09-2011, 08:20 AM
Luv2Ski's Avatar
Luv2Ski Luv2Ski is offline
TT Regular
 
Join Date: May 2010
Boat: 1988, ProStar 190, 351w
Location: Southeast (Claytor Lake, VA)
Posts: 213
ProStar200, it is original to the boat. I masked the steering wheel and painted it in place using a good quality gloss black spray paint. I found the cap behind the fuel tank (it had apparently fallen off and then worked its way back there). It was in two pieces, the rubber face and the metal backing. I painted the metal backing red and then glued it back onto the rubber which is why it looks unique (they were sliver stock). since you don't have one, I would suggest having a vinyl cutter make you one. Probably cost around $15 including design.

Lumbergh, thanks - appreciate it

Boxman3, I put the graphics together using Adobe Illustrator, had a local sign shop cut the vinyl, and then I applied them. It took some back and forth to figure out what the vinyl guy needed, but in the end it was a fun experience. The skiier piece came from a graphic that was floating around this forum a few years ago, I just combined the skiier and the prostar logo as I never really cared for the stock logo and was shooting for an updated look in general.
Reply With Quote