Originally Posted by mgorczak1
why would you remove those bolts to drain when the brass blug is lower than those allen bolts - for winterizing? There's hose lube you can get at autozone that is a designed for hoses... big believer in anit-seize as well....
The drain plugs are right under the exhaust hose(s) at the lowest point of the riser. Those are the ones to remove. Bolts on top are for the riser connection to the exhaust manifild. No need to remove unless you're changing exhaust hoses, etc.
Hypocrites, boot lickers, and crybabies…the world is full of them…. just look around - near-by
Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8
NEW SKINS ...
Originally Posted by Thrall
..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."
RE: Thrall, Welcome to the club....
Jim Friant- "Upholstery Guy"
(865) 995 0607 Hm (BSURE 2 LVMSGE)
(865) 679 2246 Cph (ANYTM UPTO 9PM EST)