View Single Post
Old 04-17-2011, 06:19 PM
jconover's Avatar
jconover jconover is offline
TT Enthusiast
Join Date: Sep 2009
Boat: 1988 ProStar 190/454HO
Location: Titletown USA, WI
Posts: 344
88 ProStar teardown

Bought my boat last year and got it running in the early summer.
(See for pitchers and engine discussion.

Decided to make some improvements this year. Wife bought me a ND tower for christmas, boat needs new carpet, and, well - there's this whole story about the prior owner and the cheap-a$$ single stage paint that he used to paint the upper third of the hull.

So let's start the story off:
Step 1, drill out the rivets, and pull the top. Stupid PO used silicone all around the hull seam, and he did a half-a$$ job of it too. Silicone sticking out, rubbed along the lower edge of the hull, looked like crap. Was even harder to get apart.
Attached Images
Reply With Quote