View Single Post
  #3  
Old 03-22-2011, 11:47 AM
JLeuck64's Avatar
JLeuck64 JLeuck64 is offline
MC Fanatic
 
Join Date: Jun 2005
Boat: 98 Prostar 190 Stars & Stripes, LT1
Location: Oregon
Posts: 695
Yup, before You paint it will need to have any cracks or imperfections repaired and sanded smooth in steps up to 320 grit. Then primer needs to be layed down and block sanded smooth in steps up to 320 grit and then wet sand with 500 grit before you lay down top coat and the clear coat. Its a LOT of work to paint those fenders to achieve a nice looking finish... so I would also recommend wetsanding the gelcoat first just to try bringing them back.
__________________
http://www.mastercraft.com/photopost...er=2572&sort=1
Need LT-1 parts?
OIL FILTER: Factory installed is a Penzoil P23, Afta market brands, AC Delco PF-454 and a Fram PH-13 or PH-30 will work.
SPARK PLUGS: AC Delco MR43LTS (gapped to .040")
FUEL FILTERS: AC Delco 25171391 (pump inlet side)
89058397 (pump outlet side)
IGNITION WIRES: Call Inboard Online @ (877) 327-7175 and order part numbers 556010A (odd bank) and 556010B (even bank)

Last edited by JLeuck64; 03-22-2011 at 12:45 PM.
Reply With Quote