View Single Post
  #107  
Old 01-19-2011, 10:54 AM
Sodar's Avatar
Sodar Sodar is offline
MC Master Poster
 
Join Date: Nov 2004
Boat: '07 ProStar 197 w/ MCX
Location: Seal Beach, CA
Posts: 10,963
Quote:
Originally Posted by Double D View Post
I hope that is not the only support your going to use to grab the nose.... My trailers original design only had a similar pad like that for the nose and under the nose of my boat was beat to he** because every time I would unload it, it would smack down on it.

I ended up putting a drive on style vertical V-pad like you see on most of the Nautique trailers and removed that setup all together. Love it!!

Pic#1 Shows Old Setup
Pic#2 Shows the added bow support down low
Pic#3 Shows the new drive in V-Pads for the nose.

He has a V-pad in addition to the roller. This is how the MC trailers have been set up since the trailer change in '93.

My '96 had the same set-up and worked great! Since your trailer is not an OEM trailer, you probably needed the added support and uprights to make it work.

__________________
-Cameron
2007 ProStar 197
1996 ProStar 190
Reply With Quote