View Single Post
  #13  
Old 12-27-2009, 08:17 AM
TMCNo1 TMCNo1 is offline
MC Hero
 
Join Date: Jul 2005
Boat: Gone
Location: Gone
Posts: 22,165
Here are two stuffing box/shaft log adjustment and/or packing replacement tutorials, http://mastercraft.com/teamtalk/show...0&postcount=31 and http://www.mastercraft.com/teamtalk/...9&postcount=39, using the packing rope of your choice shown in a previous thread. While you've got the boat disassembled, you can always replace the shaft log with a dripless one here, http://www.skidim.com/products.asp?dept=1032 or here, http://www.ojprops.com/products/shaft_seals

If your raw water pump rear seal is leaking at the bearing, it is just as practical and economical to replace the entire pump that comes with a new installed impeller, http://www.skidim.com/prodinfo.asp?number=RA057023, but if you want to rebuild it, you can do it using this tutirial, http://www.mastercraft.com/teamtalk/...09&postcount=2, which includes part numbers if you can find them here, http://www.skidim.com/products.asp?dept=1094. Always call http://www.skidim.com/contactus.asp, to be sure you get all the stuff you need.
__________________
Charter Member Number 1

Quote: 2RLAKE,
At some point in time people need to wake up, remove their cranial intrusion into their own rectal areas, and take responsibility for their own actions.





Last edited by TMCNo1; 12-27-2009 at 08:49 AM.
Reply With Quote