View Single Post
Old 10-23-2009, 11:50 AM
Posts: n/a
Originally Posted by 92Maristar View Post
When I rebuilt mine it came apart using the air methode from the manual. Did you try putting some type of lube in the cracks, then try twisting it, then the air again?
Yes, I had tried lots of penetrating lube before using the clamp method that worked (see second post).

I have the unit fully disassembled and cleaned. Should be assembling tonight with a water test on Saturday. If you have any, feel free to share "lessons learned" from your assembly experience. The manual is pretty straight forward so I am hoping there will not be any issues.

Thanks for your response.
Reply With Quote