View Single Post
  #10  
Old 07-29-2008, 10:42 PM
TheOneandOnly TheOneandOnly is offline
MC Fanatic
 
Join Date: Jun 2007
Boat: Mastercraft X2, 2008, 350
Location: MN
Posts: 504
Roonie you should have used the 90 degree high fly inserts for the top of the back bags they work awesome while removing strain from the overflow inlet vs using the straight.

Another note make sure the hose going to the KGB isnt piched by the side wall, I have herd of MC having some issues with a few KGB tanks exploding from a pinched hose (they will not warranty which is common sense but if it happened it wouldnt be able to be replaced without removing the deck, better safe than sorry). There is a kick panel right around the area held down by 4 screws, we removed it and routed out a half moon with a jijsaw worked perfect and will not allow pinching to occur.

Congrads-how do you like it? The wake for surfing is killer with one bag filled and trim plate set to 53% we noticed.

Last edited by TheOneandOnly; 07-29-2008 at 10:50 PM.
Reply With Quote