View Single Post
  #2  
Old 07-29-2008, 06:56 PM
Roonie's's Avatar
Roonie's Roonie's is offline
MC Devotee
 
Join Date: Sep 2006
Boat: 2007 MC X2, RTP-1 5.7L 310 HP 1.5:1, 14.25 x 14.5 XMP OJ Prop, bimini, depth finder, and table, teak platform, White/viper red
Location: Pacific Northwest
Posts: 1,601
Next screw in the 90 degree angle and use teflon tape. and add the new piece of hose onto it with clamp.


Then hook the new piece of hose onto the bottom inlet in the fly high sac as it will now serve as the filler and the old overflow tube then gets a quick connect put on it and serves as the new overflow for the whole system.



Push the bag back into the rear compartment and make sure lines are straight and not kinked and that is it for the rear ballast install........ As I said I did the super easy install way as some have done much more elaborate installs.
Reply With Quote