Thread: WTB: Boat Buddy
View Single Post
Old 02-27-2014, 06:27 PM
Skyskiguy Skyskiguy is offline
MC Fanatic
Join Date: May 2012
Boat: 2006 X30
Location: Utah
Posts: 781
Originally Posted by Ramp-N-Clamp View Post
With the Ramp-N-Clamp the distance from the center of the mounting bolt is 1.25 inches further from center than with a roller. If you pull the boat all the way forward you can close that distance to mounting bolt center about 5/8 closer but if your options are that critical I would stick with the roller.

If switching from Boat Buddy to R-N-C, will the position of the boat change or remain the same as where it sits with Boat Buddy?
Reply With Quote