View Single Post
  #8  
Old 02-19-2014, 10:00 PM
Cloaked Cloaked is offline
MC Maniac
 
Join Date: Dec 2004
Boat: MasterCraft
Location: Kingston,TN USA
Posts: 4,602
Quote:
Originally Posted by Footin View Post
Thanks Chuck, my platform is fairly clean but also neglected. It does not look like it has been oiled in a few years. I think I will pressure wash it, let it dry, lightly sand then apply your special mix.
I use a household 2-cup measuring cup and mix a 1-cup batch. Makes mixing easy in the proportional ratio and that is all you'll need for the first coat. While waiting on the board to dry, what little that is left over will semi-harden and be useless so just clean the measuring cup when done and remix another batch for the second coat.
__________________
93 190
.
Don't be a boot licker
.

Hose picture (internal) http://www.mastercraft.com/teamtalk/...68&postcount=8



Quote:
Originally Posted by Thrall View Post
..Some of you give a whole new meaning to the phrase "another @sshole with a Mastercraft."

RE: Thrall, Welcome to the club....
NEW SKINS in TN... Leading Edge Marine Interior

feedback on a TN company: http://www.mastercraft.com/teamtalk/...ad.php?t=58767

.
Reply With Quote