Originally Posted by Footin
If I go with the 1", I will make one 1" thru hull feed both back pumps. I think I could still feed them to the point that one could be emptying and one filling at the same time or fill both at the same time.
Then use the other thru hull for the bow sac.
I will probably changer my mind 10 times before I place my order with Wakemakers.
I still cannot decide on the size of the rear sacs, I think it will be 750's even though I will not be able to completely fill them out. The 750 should surf better than the 455 and I do have close to enough room.
If I cant decide what to do, I do have 2 600 lb round sac and a manual pump I could run for this summer and see how it does????
750's are way to big for the rear X2 lockers and really not needed IMO. I had X2 specific 455's on mine, with 2 or 3 decent sized people on the surf side, you can almost dip the rub rail. Of course you don't have stock ballast, but they are only 150 lbs each anyway. 600's might be a better option.