TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   Tilt steering play (http://www.mastercraft.com/teamtalk/showthread.php?t=58187)

dieselandmud 11-16-2013 06:36 PM

Tilt steering play
 
1 Attachment(s)
2006 X2

Is there a rebuild kit for this? If so, what is the part number?
Thanks in advance
Chris

TOO-TALL 11-16-2013 06:55 PM

My wheel has a lot of play.I took the tilt apart and found the bushing were warn.I contacted Teleflex send them a pic of the bushings,They responded.They won't sell just the bushings because of safety....bla,bla.So I would have to buy the complete tilt assembly same in your pic.

Cloaked 11-16-2013 07:06 PM

Quote:

Originally Posted by dieselandmud (Post 992061)
2006 X2

Is there a rebuild kit for this? If so, what is the part number?
Thanks in advance
Chris

here you go............ :D

have a look here and see if this gets you motivated. I do not know the part number.

http://www.mastercraft.com/teamtalk/...postcount=1039

.

mikeg205 11-16-2013 07:31 PM

you can tighten the helm a bit - or you can just replace the front part of the mechanism for a bit over $100 - http://www.starmarinedepot.com/telef...FatAMgodO0sAXw

Cloaked 11-16-2013 07:59 PM

Quote:

Originally Posted by mikeg205 (Post 992067)
you can tighten the helm a bit - or you can just replace the front part of the mechanism for a bit over $100 - http://www.starmarinedepot.com/telef...FatAMgodO0sAXw

ticket

.

uplander 11-16-2013 08:43 PM

have any of you experienced a ratcheting sound when you turn back after making a turn

hope that makes sense

not trying to highjack thread but it is related subject

TOO-TALL 11-16-2013 08:49 PM

Quote:

Originally Posted by mikeg205 (Post 992067)
you can tighten the helm a bit - or you can just replace the front part of the mechanism for a bit over $100 - http://www.starmarinedepot.com/telef...FatAMgodO0sAXw

Great find mike......thanks

dieselandmud 11-16-2013 11:54 PM

Yes, THANK YOU Mike!

bturner2 11-17-2013 07:54 AM

Quote:

Originally Posted by uplander (Post 992078)
have any of you experienced a ratcheting sound when you turn back after making a turn

hope that makes sense

not trying to highjack thread but it is related subject

I think you may be referring to the sound of the pinion moving across the rack which is normal if there are no binds or skipping in the operation. I've noticed this mostly if the boat is out of the water and turn the wheel quickly. That is to say if we're both referring to the same noise.

uplander 11-17-2013 08:05 AM

it was a racking sound, has only happened a couple times


All times are GMT -4. The time now is 02:16 PM.