TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Towers (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=61)
-   -   Monster MTK install (http://www.mastercraft.com/teamtalk/showthread.php?t=57540)

Aussie MC 09-23-2013 08:35 AM

Monster MTK install
 
Hi,
I've recently purchased an 89' Prostar. Had a few teething problems but love it already. My question is, has anyone seen a Monster MTK installed on one of these. I'm planning on putting one on my boat. If anyone has any good or bad advice that can help me out that would be awesome. If anyone's interested i'll post pic of the install. I've already purchased the tower. The reason I went with this design is hopefully it foul on the Bimini.
Thanks in advance.

Razzys Wagon 12-04-2013 12:45 PM

Mine is a '87

http://i671.photobucket.com/albums/v...ps48c1c886.jpg

With a custom Bimini.....
http://i671.photobucket.com/albums/v...ps6aff06bb.jpg

Razzys Wagon 12-04-2013 12:49 PM

You will need to re-enforce the front mounting points with some steel plates under the bottom, up inside the bow.....

neil.anderson63 12-04-2013 01:04 PM

Nice looking ride RAZZY. :toast:

Double D 12-04-2013 01:14 PM

1 Attachment(s)
Unfortunately thats not the MTK tower. I have the original MT, similar to yours Razzy, and did not have to add any extra steel to the back sides. The Mounting brackets came with backing plates already and the glass is typically thick enough to handle the load. With the MTK I am sure MT provides direction on if extra plating should be used.

The MTK looks like this on that vintage of boat. Direct from the MT site.

....

D3skier 12-04-2013 01:25 PM

Quote:

Originally Posted by Double D (Post 995329)
Unfortunately thats not the MTK tower. I have the original MT, similar to yours Razzy, and did not have to add any extra steel to the back sides. The Mounting brackets came with backing plates already and the glass is typically thick enough to handle the load. With the MTK I am sure MT provides direction on if extra plating should be used.

The MTK looks like this on that vintage of boat. Direct from the MT site.

....

if that's the correct mounting point for that tower it looks like it would interfere with getting wide on the buoy when you run the course especially when getting in to shorter line lengths

AussieMC 12-04-2013 06:25 PM

@Aussie MC, What's going on with your User name? Very similar, only a space different. Where abouts are you located?

Razzys Wagon 12-04-2013 08:03 PM

Lol,no it ain't.....I just seen monster and posted....sorry!!

Aussie MC 11-21-2014 06:57 PM

haa haa Mildura vic. AussieMC thats weird. Yourself?

Aussie MC 11-21-2014 07:09 PM

2 Attachment(s)
This is the finished Product. ended up doing it myself. I'm very happy with the end result. I have put a full season on it now and held up fine.


All times are GMT -4. The time now is 05:51 PM.