TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Ballast (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=60)
-   -   Ballast hose diameter (http://www.mastercraft.com/teamtalk/showthread.php?t=57106)

Zad 08-30-2013 06:39 AM

Ballast hose diameter
 
I am extending the ballast hose in my rear lockers and need to identify the hose diameter to order more to match what I have. Is 1" hose measured one inch outside diameter?

mikeg205 08-30-2013 08:28 AM

should be inside diameter.

uplander 08-30-2013 11:19 PM

Should be 5/8" inside diameter hose

JRW160 08-31-2013 10:56 AM

1" inside diameter

uplander 08-31-2013 07:44 PM

ok mine is 5/8"

normally when ordering you use inside diameter

http://www.grainger.com/Grainger/Sta...ter-Hose-5RLY9

MLA 09-01-2013 09:39 PM

The hose commonly used on boats is measured by ID. The 3 most commonly used ballast ID's are .75, 1.0 and 1.125 inch.


All times are GMT -4. The time now is 03:00 PM.