TeamTalk (
-   Trailers (
-   -   prostar 209 trailer (

franciscolalas 07-31-2013 10:14 AM

prostar 209 trailer
I'planning to fabricate a trailer for my 209 and I need one or two dimensions to start.
Can anyone be so kind to measure the width of the main frame (on the rear, from the center of the main left tube to the center onf the main right tube).

thatsmrmastercraft 07-31-2013 10:25 AM

This sounds like a very interesting project. Please post pics as you progress.

franciscolalas 07-31-2013 11:21 AM

Will do! Already have one axle from a van, first I will need to make it wider, let's wait and see if someone can provide the width od the main frame.

The Youngster 07-31-2013 11:59 AM

Center to center is 70.5" in the rear. Let me know if you need any more measurements.


franciscolalas 07-31-2013 05:38 PM

Thanks Clayton!

I will start to make some drawings and let you know if I need more measures. Your's single or double axle? Thanks

The Youngster 07-31-2013 10:33 PM

I have a single axle. Have traveled many long distances with it and have had zero problems. I also like the mobility of the single axle when not attached to my truck. It really makes turning the trailer a lot easier.

franciscolalas 08-01-2013 01:21 AM

For me it's also important the mobility of the trailer when not attached to the car, so I will also go for single axle. I'm thinking about using 3"x1,5" tube section for the frame, is that what you have on yours? Thanks

franciscolalas 08-28-2013 05:59 AM

4 Attachment(s)
Work has begun! Once again, thanks to Clayton for providing the measurements!

Burbon66 08-28-2013 07:28 AM

Great project, good luck. My X9 is sitting on a factory dual axle modified to Australian width regs. So if there is any measurements I can help with, please let me know.

thatsmrmastercraft 08-28-2013 09:17 AM

Looks like you have used the welder once or twice before. Nice work. I wish you were closer so I could make you a deal on wheels and tires.

All times are GMT -4. The time now is 03:48 AM.